R Online Compiler

Run R code online with ggplot2, dplyr, tidyr and data.table installed. See the console output and your plots side by side. Free, no setup.

Thư viện cài đặt sẵn
3 tổng số lượt thực thi (3 trong tháng này)
Nhúng
Kết quả

Luyện Python với thử thách lập trình

Giải các bài tập thực tế ngay trên trình soạn thảo này: chạy kiểm thử mẫu, nộp bài và nhận đánh giá code từ AI.

Tất cả thử thách Python
Dễ

Rectangle Perimeter

Compute the perimeter of a rectangle from its sides.

Bạn sẽ học Số họcGiá trị trả về
người mới bắt đầuLearning-pathVariables
Dễ

Distance Between Points

Compute the straight-line distance between two points.

Bạn sẽ học Định lý PythagoreCăn bậc hai
người mới bắt đầuhàmLearning-pathtoán
Dễ

Trung Bình Của Ba Số

Tính trung bình cộng của ba số nguyên.

Bạn sẽ học Số họcPhép chia
người mới bắt đầuLearning-pathVariables
Dễ

Tích vô hướng của hai vector

Nhân hai vector theo từng phần tử rồi cộng kết quả lại, phép tính cốt lõi của mọi nơ-ron.

Bạn sẽ học VectorTích vô hướng
Mạng nơ-rontrí tuệ nhân tạohọc máy
Dễ

Days in a Month

Return how many days a month has, including leap years.

Bạn sẽ học Quy tắc lịchHàm phụ trợ
người mới bắt đầuđiều kiệnhàmLearning-path
Dễ

Kiểm Tra Số Nguyên Tố

Xác định xem một số có phải là số nguyên tố hay không.

Bạn sẽ học Tính chia hếtTối ưu vòng lặp
người mới bắt đầuvòng lặpsốhọc sinh mới học
Dễ

Celsius to Fahrenheit

Convert a temperature from Celsius to Fahrenheit.

Bạn sẽ học Công thứcThứ tự toán tử
người mới bắt đầuLearning-pathVariables
Dễ

Tam giác số

Xây dựng một tam giác các số tăng dần.

Bạn sẽ học Hàng tăng dầnBiến đếm qua các hàng
người mới bắt đầuLearning-pathvòng lặp lồng nhauvẽ hình
Dễ

Min and Max Together

Find the smallest and largest value in one pass.

Bạn sẽ học Một lần duyệtTrả về nhiều giá trị
Arraysngười mới bắt đầuhàmLearning-path
Dễ

Count Pairs With a Sum

Count pairs of positions whose values add up to a target.

Bạn sẽ học Cặp chỉ sốTránh đếm trùng
Arraysngười mới bắt đầuLearning-pathvòng lặp lồng nhau
Dễ

Absolute Value Without abs

Compute an absolute value with a condition.

Bạn sẽ học Đổi dấuKhông dùng hàm có sẵn
người mới bắt đầuđiều kiệnLearning-path
Dễ

Số Lớn Nhất Trong Ba Số

Chọn số lớn nhất trong ba số mà không dùng hàm max có sẵn.

Bạn sẽ học So sánhKết hợp điều kiện
người mới bắt đầuđiều kiệnLearning-path

🧩 About This R Online Compiler

The CodeUtility R Online Compiler lets you write and run R code in your browser - no R installation, RStudio or package setup needed. Your code runs with R 4.4 in an isolated sandbox, and the console output appears next to the editor.

Popular packages are already installed: tidyverse (dplyr, tidyr, readr, purrr, stringr), ggplot2, data.table, lubridate, janitor, zoo, patchwork, viridis, scales, and modelling packages such as caret, randomForest, rpart, e1071, glmnet and cluster. Load them with library() as usual.

Charts work out of the box: every plot your code draws (base R or ggplot2) is shown as an image under the output, and you can open it full size or download it as a PNG.

It is a quick way for students to practise R, for analysts to test a snippet before running it on real data, and for teachers to share a working example with a class.

Không chỉ là công cụ chạy mã

Sử dụng trình soạn thảo nhiều tệp, terminal thực thi biệt lập, thư viện riêng theo môi trường chạy, không gian làm việc lâu dài, tính năng chia sẻ và cộng tác theo thời gian thực ngay trong cùng một trình thực thi.

Cách sử dụng trình thực thi này?

Chọn môi trường chạy, mở hoặc tạo tệp, viết mã rồi nhấn Chạy. Kết quả xuất hiện trong terminal; người dùng đã đăng nhập có thể lưu tệp trong không gian làm việc, cài thư viện và cộng tác qua liên kết chia sẻ.

  1. Chọn phiên bản rồi chỉnh sửa tệp hiện tại hoặc mở một tệp khác trong không gian làm việc.
  2. Chạy mã, nhập dữ liệu trong terminal khi được yêu cầu và xem lại lịch sử chạy đã lưu.
  3. Sử dụng thư viện, công cụ không gian làm việc, chia sẻ và trò chuyện khi tác vụ cần nhiều hơn một đoạn mã.

💡 R Basics Guide for Beginners

1. Variables and Assignment

R uses <- to assign a value (= works too). Names are case-sensitive.

name <- "Alice"
age <- 30
is_student <- FALSE
cat(name, "is", age, "years old\n")

2. Vectors

A vector holds values of one type. Most operations work on the whole vector at once.

scores <- c(72, 88, 95, 64)
mean(scores)        # 79.75
scores * 2          # every value doubled
scores[scores > 70] # 72 88 95
length(scores)

3. Conditionals

Use if / else for one value and ifelse() for a whole vector.

x <- 7
if (x %% 2 == 0) {
  print("even")
} else {
  print("odd")
}

ifelse(scores >= 70, "pass", "fail")

4. Loops

for walks over a vector; while repeats while a condition holds.

for (i in 1:3) {
  cat("Step", i, "\n")
}

n <- 1
while (n < 100) n <- n * 2
print(n)  # 128

5. Functions

Functions are values; the last expression is returned. Arguments can have defaults.

area <- function(width, height = width) {
  width * height
}
area(3, 4)  # 12
area(5)     # 25

6. Lists

A list can hold values of different types, with names.

person <- list(name = "Bao", age = 21, langs = c("R", "SQL"))
person$name
person[["langs"]][2]  # "SQL"
str(person)

7. Data Frames

A data frame is a table: each column is a vector of the same length.

df <- data.frame(
  city = c("Hanoi", "Paris", "Lima"),
  temp = c(31, 18, 22)
)
df[df$temp > 20, ]
summary(df$temp)

8. Apply Functions

sapply() and lapply() run a function on every element, without writing a loop.

words <- c("apple", "kiwi", "banana")
sapply(words, nchar)
lapply(1:3, function(n) n^2)

9. dplyr Pipelines

The pipe (|> or %>%) passes a result to the next step.

library(dplyr)
mtcars |>
  group_by(cyl) |>
  summarise(avg_mpg = mean(mpg), cars = n()) |>
  arrange(desc(avg_mpg))

10. Plots with ggplot2

Map columns to axes and colours, then add layers. The chart appears under the output.

library(ggplot2)
ggplot(mtcars, aes(wt, mpg, color = factor(cyl))) +
  geom_point(size = 3) +
  labs(title = "Weight vs. fuel use", color = "Cylinders")

11. Strings

paste() joins text, sprintf() formats it, and stringr has friendly helpers.

paste("Hello", "R", sep = ", ")
sprintf("%.1f%% done", 42.567)
toupper("data")
library(stringr)
str_detect(c("cat", "dog"), "a")

12. Handling Errors

tryCatch() runs code and handles an error or a warning instead of stopping.

result <- tryCatch(
  log(-1),
  warning = function(w) {
    message("Warning: ", conditionMessage(w))
    NA
  }
)
print(result)