R Online Compiler

Run R code online with ggplot2, dplyr, tidyr and data.table installed. See the console output and your plots side by side. Free, no setup.

पहले से इंस्टॉल लाइब्रेरी
3 कुल निष्पादन (3 इस महीने)
एम्बेड करें
आउटपुट

कोडिंग चैलेंज के साथ Python का अभ्यास करें

सीधे इस एडिटर में प्रैक्टिकल समस्याएँ हल करें: सैंपल टेस्ट चलाएँ, सबमिट करें, और AI कोड रिव्यू पाएं।

सभी Python चैलेंज
आसान

Rectangle Perimeter

Compute the perimeter of a rectangle from its sides.

आप सीखेंगे अंकगणितलौटाए गए मान
शुरुआतीLearning-pathVariables
आसान

Distance Between Points

Compute the straight-line distance between two points.

आप सीखेंगे पाइथागोरस प्रमेयवर्गमूल
शुरुआतीफ़ंक्शनLearning-pathगणित
आसान

Average of Three

Average three whole numbers.

आप सीखेंगे अंकगणितभाग
शुरुआतीLearning-pathVariables
आसान

दो वेक्टरों का डॉट प्रोडक्ट

दो वेक्टरों के हर तत्व को आपस में गुणा करके परिणाम जोड़ें, यही हर न्यूरॉन की मूल गणना है।

आप सीखेंगे वेक्टरडॉट प्रोडक्ट
न्यूरल नेटवर्कएआईमशीन लर्निंग
आसान

Days in a Month

Return how many days a month has, including leap years.

आप सीखेंगे कैलेंडर के नियमसहायक फ़ंक्शन
शुरुआतीशर्तें (if-else)फ़ंक्शनLearning-path
आसान

मूल संख्या जांचें

निर्धारित करें कि कोई संख्या मूल है या नहीं।

आप सीखेंगे विभाज्यतालूप को तेज़ करना
शुरुआतीलूपसंख्याएँनए छात्र
आसान

Celsius to Fahrenheit

Convert a temperature from Celsius to Fahrenheit.

आप सीखेंगे सूत्रऑपरेटर प्राथमिकता
शुरुआतीLearning-pathVariables
आसान

Number Triangle

Build a triangle of increasing numbers.

आप सीखेंगे बढ़ती पंक्तियाँपंक्तियों के पार काउंटर
शुरुआतीLearning-pathनेस्टेड लूपपैटर्न
आसान

Min and Max Together

Find the smallest and largest value in one pass.

आप सीखेंगे एक ही पासकई मान लौटाना
Arraysशुरुआतीफ़ंक्शनLearning-path
आसान

Count Pairs With a Sum

Count pairs of positions whose values add up to a target.

आप सीखेंगे इंडेक्स के जोड़ेदोहरी गिनती से बचना
ArraysशुरुआतीLearning-pathनेस्टेड लूप
आसान

Absolute Value Without abs

Compute an absolute value with a condition.

आप सीखेंगे चिह्न बदलनाबिल्ट-इन के बिना
शुरुआतीशर्तें (if-else)Learning-path
आसान

Largest of Three

Pick the largest of three numbers without a built-in max.

आप सीखेंगे तुलनाशर्तें जोड़ना
शुरुआतीशर्तें (if-else)Learning-path

🧩 About This R Online Compiler

The CodeUtility R Online Compiler lets you write and run R code in your browser - no R installation, RStudio or package setup needed. Your code runs with R 4.4 in an isolated sandbox, and the console output appears next to the editor.

Popular packages are already installed: tidyverse (dplyr, tidyr, readr, purrr, stringr), ggplot2, data.table, lubridate, janitor, zoo, patchwork, viridis, scales, and modelling packages such as caret, randomForest, rpart, e1071, glmnet and cluster. Load them with library() as usual.

Charts work out of the box: every plot your code draws (base R or ggplot2) is shown as an image under the output, and you can open it full size or download it as a PNG.

It is a quick way for students to practise R, for analysts to test a snippet before running it on real data, and for teachers to share a working example with a class.

सिर्फ़ एक कोड रनर से कहीं अधिक

एक ही एक्ज़ीक्यूटर में मल्टी-फ़ाइल एडिटर, अलग-थलग निष्पादन टर्मिनल, रनटाइम-विशिष्ट लाइब्रेरी, स्थायी वर्कस्पेस, साझाकरण और रीयल-टाइम सहयोग का उपयोग करें।

इस एक्ज़ीक्यूटर का उपयोग कैसे करें?

रनटाइम चुनें, फ़ाइल खोलें या बनाएँ, अपना कोड लिखें और चलाएँ चुनें। आउटपुट टर्मिनल में दिखाई देता है। साइन-इन उपयोगकर्ता वर्कस्पेस में फ़ाइलें रख सकते हैं, लाइब्रेरी इंस्टॉल कर सकते हैं और शेयर के माध्यम से सहयोग कर सकते हैं।

  1. एक संस्करण चुनें और वर्तमान फ़ाइल संपादित करें या वर्कस्पेस की दूसरी फ़ाइल खोलें।
  2. कोड चलाएँ, माँगे जाने पर टर्मिनल में इनपुट दें और सहेजा गया रन इतिहास देखें।
  3. जब कार्य के लिए एक से अधिक कोड अंश चाहिए, तो लाइब्रेरी, वर्कस्पेस टूल, शेयरिंग और चैट का उपयोग करें।

💡 R Basics Guide for Beginners

1. Variables and Assignment

R uses <- to assign a value (= works too). Names are case-sensitive.

name <- "Alice"
age <- 30
is_student <- FALSE
cat(name, "is", age, "years old\n")

2. Vectors

A vector holds values of one type. Most operations work on the whole vector at once.

scores <- c(72, 88, 95, 64)
mean(scores)        # 79.75
scores * 2          # every value doubled
scores[scores > 70] # 72 88 95
length(scores)

3. Conditionals

Use if / else for one value and ifelse() for a whole vector.

x <- 7
if (x %% 2 == 0) {
  print("even")
} else {
  print("odd")
}

ifelse(scores >= 70, "pass", "fail")

4. Loops

for walks over a vector; while repeats while a condition holds.

for (i in 1:3) {
  cat("Step", i, "\n")
}

n <- 1
while (n < 100) n <- n * 2
print(n)  # 128

5. Functions

Functions are values; the last expression is returned. Arguments can have defaults.

area <- function(width, height = width) {
  width * height
}
area(3, 4)  # 12
area(5)     # 25

6. Lists

A list can hold values of different types, with names.

person <- list(name = "Bao", age = 21, langs = c("R", "SQL"))
person$name
person[["langs"]][2]  # "SQL"
str(person)

7. Data Frames

A data frame is a table: each column is a vector of the same length.

df <- data.frame(
  city = c("Hanoi", "Paris", "Lima"),
  temp = c(31, 18, 22)
)
df[df$temp > 20, ]
summary(df$temp)

8. Apply Functions

sapply() and lapply() run a function on every element, without writing a loop.

words <- c("apple", "kiwi", "banana")
sapply(words, nchar)
lapply(1:3, function(n) n^2)

9. dplyr Pipelines

The pipe (|> or %>%) passes a result to the next step.

library(dplyr)
mtcars |>
  group_by(cyl) |>
  summarise(avg_mpg = mean(mpg), cars = n()) |>
  arrange(desc(avg_mpg))

10. Plots with ggplot2

Map columns to axes and colours, then add layers. The chart appears under the output.

library(ggplot2)
ggplot(mtcars, aes(wt, mpg, color = factor(cyl))) +
  geom_point(size = 3) +
  labs(title = "Weight vs. fuel use", color = "Cylinders")

11. Strings

paste() joins text, sprintf() formats it, and stringr has friendly helpers.

paste("Hello", "R", sep = ", ")
sprintf("%.1f%% done", 42.567)
toupper("data")
library(stringr)
str_detect(c("cat", "dog"), "a")

12. Handling Errors

tryCatch() runs code and handles an error or a warning instead of stopping.

result <- tryCatch(
  log(-1),
  warning = function(w) {
    message("Warning: ", conditionMessage(w))
    NA
  }
)
print(result)